Choosing uPVC Replacement Window Handles

Nearly all customers agree that the windows handles made of upvc are easy to install and feel like high-quality. It is important to be aware that the handle you choose for your window should be appropriate for your.

The primary factor is the step height, which refers to the gap beneath the nose of the handle to the base or frame. Other considerations include locking mechanisms and styles.

Replacement parts

There are a wide range of replacement upvc window handles available to buy. They come in a variety of colours and styles so there's bound to be something that will fit your windows. It's easy to buy on impulse, particularly when the handle is damaged, so it's best to take your time and check the details prior to committing to purchasing a new one. The first step is to know what type of handles made from upvc you have and what the differences between them. The table below outlines the most common handles to help you identify the one that is suitable for your upvc windows.

The majority of double-glazed windows today come with handles that are epag. They are usually attached to the frame using two screws that are screwed into the frame from both sides, above and below.

They have a spindle bar on the back, which can be of a variety sizes and this will determine how they work (either left or right handed). It's important to take the measurements of the handle you have to ensure that you order the correct replacement.

The arm is fixed to the frame by two bolts, similar to the Espag handle. However, the handle has a lower projection, so that it won't poke your blinds. This is a great option if you have blinds for your windows made of Upvc and you want to make sure the handle will blend with them.

Cockspur handles look similar to Espag handles, however they have a nose which closes over a wedge which rests on the frame of the window. This type of handle is typically used on older Upvc windows as well as on some wooden windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing the top of window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the fence. They also make a great option for people with restricted mobility. They can be a great way to improve security and accessibility within the home.

Tips and suggestions and

A lot of people will need to replace their uPVC window handles at some time. It is important to know a few tips and uPVC Replacement Window Handles tricks to help you make the task easier.

Check what type of handle is located at your residence. Based on the type of handle and locking mechanism, it might be necessary to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing and sizing, you'll have to change them as well as the handle itself.

Fortunately, the majority of uPVC handles conform to industry standards and are alike. This allows for a relatively easy process. First, you must remove the screws on the handles. They are typically pozidrive screws. After the screws have been removed, you will be able to dismantle the handle.

It's a good idea to take note of how far the spindle protrudes from the base of your handle when you separate it. This will allow you to determine the length of the spindle for the replacement handle. To do this, simply take a measurement of the square peg that sticks out from the base of the handle and use this as a reference.

This is particularly important for inline uPVC windows handles, as they are always straight and will only open to the left or right. They won't work in the middle. It's a good idea if you're not sure of the kind of handle you have at your home, to borrow a handle and see how it works.

You can also determine the handiness of a uPVC window by observing how the handle spins when it is used. Handed handles will turn either clockwise or anti-clockwise. If you're not sure, ask someone to open the window using the handle to see how it functions.

Measure the spindle

It isn't easy to select the right replacement handle for your window because not all handles have the same dimensions. It is essential to accurately measure the spindle when fitting a new handle. This will ensure that the handle is suitable. There are many different kinds of uPVC window replacement companies handles that operate in different ways, therefore it is crucial that you know which kind of handle you have as well as the type of locking system that you are using.

Espag handles come with a spindle that extends from the rear of the handle and upvc replacement window handles then into the lock gearbox inside the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge shaped striker block. They are also quite easy to install and can be locked with keys. It is more difficult to replace these handles as they aren't as common as the handles with espagnolette.

If you have an open tilt and turn uPVC window then you will require a particular type of uPVC replacement handle that comes with an entirely different locking mechanism. It can tilt the window open but also turn it around to open it fully. You must choose an opening handle that has a spindle of at least 55mm to be able reach the window frame.

The same method can be used to remove and replace the uPVC handle. But, you'll need to be cautious when unscrewing it. It is possible to open the window a bit wider than usual to ensure that you reach both screws that are fixing it to the frame. Once you have fitted your new uPVC handle and verified that it is in the correct position, then you can tighten the screws and test the lock to make sure it works correctly.

Replace the handle with the new one.

Once you have the right replacement handle, it will simply screw into the right place. It will require a screwdriver and an electric one could be a lot easier. It is essential not to overtighten the screws before screwing them into. This can cause the handle or knob to warp.

The second step in installing the handle is to put in the spindle. The spindle is the component which runs through the handle to operate the locking mechanism inside the window. It is crucial that the component is properly fitted, as this will permit the window to open and closed securely.

There are several different types of uPVC window handles. There are several types of window handles made of uPVC.

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curved design that is useful for windows in difficult-to-access locations.

Tilt and Turn Handles These are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. In the UK, they are commonly called "Bay Windows".

If your uPVC window handle is damaged, it can be a major hassle. There is no need to change the entire uPVC windows because of a broken window handle. There are many simple steps you can take to repair and replace a damaged uPVC window handle.

By identifying the type of window you have, measuring the length of the spindle, and then purchasing the replacement window glass near me handle, you can quickly fix the broken window handle. It is essential to be patient and ensure safety when working with windows and tools, however, this is a straightforward task. It could be the difference between a safe and secure home, or a window that is easily opened. Bridgewater Glass is the place to visit if you have any questions or would like to speak to an expert about replacing your window handle. We have a team that is knowledgeable and experienced to assist you with any problem.