Is It Time For Replacement Double Glazed Windows?

Replace your windows to increase your home's energy efficiency. These modern designs feature uPVC or aluminum frames that hold the heat inside your home.

If you've observed condensation, draughts or leaks around your window frames, it could be time to replace the double-glazed windows. Find a local FENSA approved installer to start.

1. Excessive Condensation

Double glazing can help you maintain heat in your home and lower your energy costs. If you notice a lot of condensation, you should be aware of the signs that your windows may need to be replaced. This can lead to a myriad of problems, such as mildew and mould.

Condensation occurs when warm, humid and moist air comes into contact the cold surface. You may have noticed it at home when you woke up and found your glasses covered with an oily film or even outside when temperatures dropped below dew point.

In most instances, this is due to internal humidity levels increasing when the temperature outside drops. The moisture can also build up on the inside of your windows if there isn't enough ventilation or if your home is too hot and the window is open when you are showering or cooking.

The plaster exposed near the window will usually produce external condensation. It's not as bad as it sounds, because the heat of the sun and the air's movement will usually dry it up. It is worth considering specialized glass that will prevent the formation of condensation. For instance, Pilkington's ActivTM Self-Cleaning glass, nanacademy.co.kr which has a hydrophilic surface that repels moisture and reduces condensation.

If you see internal condensation between the window panes, then it's likely that the seal on the window has failed. The window will need to be replaced. It's also likely to be allowing heat to escape, which is why it's essential to have the issue investigated by a professional.

2. Signs of Wear and Tear

Your windows don't talk but they will attempt to signal that something isn't right. If you're seeing signs such as cracks, repairmywindowsanddoors.Co.uk condensation, draughts or draughts it could be an ideal time to consider replacing your double glazing.

Modern upvc window handle replacement Windows are designed to cut down on energy bills and also provide insulation. They keep hot air out in summer and keep warm air from escaping during winter, saving you cash on cooling and heating costs. However, even energy efficient double-glazed windows have short lifespan and may require replacement.

The most typical sign that double-glazed windows are worn out is condensation. This typically occurs between the two glass surfaces, and can be a sign that the seal has failed or windows aren't as energy efficient as they used to be.

Another sign to look for is the windows that are sweating from the inside. This is a sign that the temperature of the air in your home falls below the dew point, which causes condensation of water vapour on the the windows. This could be caused by leaks or seals.

It is best to hire an professional to replace your windows if they show signs of wear. This is a task that shouldn't be done as a DIY task, as it can be risky and could result in broken glass. Instead, you should hire a company that specializes in the installation of double glazed windows, since they have the appropriate tools and safety equipment needed to finish the task quickly and efficiently. In addition, they will be capable of providing you with advice about the different types of double glazed windows that are available and which ones are best for your home.

3. Unsealed Windows

Double-glazed windows are made of two panes, with an opening between them. This creates an insulating barrier to stop your warm air escaping and cold air from outside coming inside. Double-glazed windows are more efficient in energy use than single pane windows and can cut your energy costs by keeping your home warm for longer.

In a sealed glass window the space between the two panes is filled with inert gases like argon xenon, argon, and Krypton. These gases impede the transfer of heat within the window which makes it more energy efficient, and also lowering the cost of heating. Over time, however, the seal between glass can break, allowing air to pass through, which reduces its insulation properties.

Foggy windows are another sign that the seal on your window has failed and allows moisture to seep in. As the weather changes, fogginess typically disappears. However, you may still feel the draughts.

It can also allow pests such as centipedes, spiders, ants and mosquitoes to get into your home. It can also let pollen and dirt enter your home, which could cause allergies in the indoors. A strong window seal can reduce noise from the street and other sources.

If you're not sure if your seal is damaged, get it checked immediately. A professional can tell you how to fix it and replace the damaged IGU unit. The expert will disassemble the window sash, take out the old IGU unit and replace it with a new one. If the IGU is under warranty, it will be covered by your contractor or manufacturer. If you do not have a replacement, you'll need to put up your windows.

4. Poor Windows

Double-glazed windows can help you cut down on energy costs. They let in more light and block out external sounds, while also making sure your home is well-insulated. If they aren't functioning properly however, it's a major issue that can result in drafts and moisture within the home. It is crucial to get the windows replaced or repaired as soon as you can to prevent damage and leaks from happening.

The most obvious sign that your double-glazed windows aren't sealing correctly is the emergence of condensation. This happens when the space between the two glass panes develops a fogginess that cannot be wiped off either side. The seal between the glass panes gets broken, allowing gasses like argon and Krypton (which are gases) to escape. This results in a moist space within your home.

Another telltale sign that your windows aren't functioning as they should is an increase in your utility bills. Your windows are designed so that warm air cannot escape, and cold air can't get in. Any change in your utility bill is a good indicator that it's time to upgrade your double glazing.

Poor installation is usually the cause of faulty windows. Installing windows requires precision, skill and training. Homeowners should not try to do it by themselves. Windows that are poorly installed could cause water leaks, mold growth and even leaks. Window failures that are premature can be caused by poor maintenance and cleaning of the windows. This often includes using powerful chemicals and power washers which damage the frames, glass and seals. Replacing your windows with a reputable company is the best option to avoid these issues and ensure they continue to perform well for a long time to be.

5. Energy bills are on the rise

It is important to make the most efficient use of energy in order to avoid wasting it. A home's windows can be a significant contributor to the energy efficiency of a home. If your energy bills are rising, it could be time to upgrade your double-glazed windows.

Leaks and drafts in old windows can increase your energy costs substantially. This is because they allow cold air to enter a property and can even lead to loss of heat. By converting windows, and using newer technology this issue can be solved and you can enjoy an energy-efficient home throughout the year.

Double-glazed windows can help keep your home warm during winter months by trapping warm air and keeping out cold air. This helps reduce the dependence on central heating, and can make your home efficient, particularly when you live in a crowded area where heating costs have increased.

Double glazing can be a lifesaver during the summer months as it prevents heat from being trapped inside your home. This means that you will rely less on electric heaters and air conditioning which will reduce your energy bills and the impact on the environment.

Retrofit double glazed windows are an excellent option for homeowners who want to save money on their energy bills but don't have the funds for an entire window replacement. The installation process is quicker and requires less materials, since the frame and sash remain intact. The homeowner is able to choose the style of window they prefer and still get the benefits of an IGU that is of top quality. The new glass can be filled with argon for greater efficiency of energy.