게시판

문의게시판

How Ghost Immobiliser London Changed My Life For The Better

페이지 정보

작성자 Rebecca Makowsk… 날짜24-02-29 15:11 조회25회 댓글0건

본문

Ghost 11 Immobiliser

You need a solution that will safeguard your pride and joy from car thefts. With ghost 11 immobiliser, you'll be able to rest in mind that your car is safe from key cloning hacking as well as keyless access.

The device is unnoticeable to thieves as it has no LED indicators. Your insurance company will recognise it because of its TASSA approval.

TASSA Approved

The Autowatch Ghost Immobiliser is a hidden device that operates in the background and safeguards your vehicle from hacking, key theft and cloning. It does this by communicating with the vehicle's ECU through its data bus, and avoiding detection from common diagnostics of thieves and RF scanning tools.

The device connects to the existing CAN data network in your vehicle and stops the engine from starting by preventing it from starting until an exact sequence of buttons is activated. The buttons can be chosen from a list of pre-programmed numbers. If you want to add a layer of security you can also use a mobile app to generate the code for you. This means that if you're not in your vehicle for long periods of time, you can deactivate the system using the app, and nobody can drive it without knowing.

It is installed discreetly (without damaging your vehicle) and cannot be taken away by a thief. The CAN Bus immobiliser is extremely tiny and can be concealed behind the steering wheel, door panels or center console, making it practically unnoticeable. It is designed to be almost inaccessible, and does not have "telltale" relay clicks that can reveal that it's been installed.

The ghost immobiliser installer is extremely difficult to bypass using an ECU that is new or a key. The CAN Bus immobiliser is extremely discreet and there are no transponders or LEDs to make it clear that it's been installed it, which is particularly useful for those with rare or expensive vehicles.

The Autowatch Ghost is a great immobiliser for expensive or rare vehicles. The Autowatch Ghost can help prevent opportunist thefts and is perfect for those who are replacing their vehicle, or are waiting a long time for an upgrade.

CAN Bus Immobiliser

We are able to supply the latest generation of CAN bus immobilisers that are TASSA approved and fully insured, designed to protect your vehicle from high tech thieves. These new devices are much more efficient than the older immobilisers that are re-programmable as they feature dual digital and analogue immobilisation making it impossible for hi technology thieves to use relay key cloning, key cloning and signal jamming to drive off your vehicle in a matter of minutes.

This innovative and unique CAN bus system is installed by a professional installer and utilizes your existing buttons to create a unique, changeable PIN button sequence that needs to be entered before the car is able to begin. It is silent unlike trackers and alarms which could alert thieves of its presence.

To operate the device thieves will cut the wiring in your vehicle for the red data network CAN, which is where ECUs connect to each other (shown above in yellow). The thief would use an easy electronic tool to inject fake messages in the CAN bus. This is a series messages that state "key valid" which engines control units will accept and allow your vehicle to start.

The Ghost will not take this and stop the vehicle from getting started. The driver will then need to enter a unique and changeable PIN code, which has to be entered before the car can start using the buttons that are already present in your car (4-21 presses) or with the mobile phone app, Bluetooth tag or even your smartwatch!

This system is far more advanced than the cheaper ghost immobiliser fitter/Starline i96s available on the market, which have digital engine blocking. They can also be programmed using aftermarket key fobs. This is the new generation of security that will protect your vehicle against keys that are old-fashioned and high-tech techniques employed by criminals in car parks and garages around the UK.

No key fobs or LED indicators

Ghost is a discreet device. It does not have any LED indicators which would signal its presence. It's therefore unnoticeable by car thieves. This makes it a fantastic option for vehicles that have a higher risk of theft such as classic cars or luxurious vehicles. Ghost is an effective deterrent against thieves because it doesn't display any visible indicators. This is even if a wrong key is used or if the vehicle's key fob battery is low.

It is also easy to install and can be accomplished by one of our skilled technicians. There is no wiring additional since the system is directly connected with your CAN bus data in your control unit. There is no requirement for additional immobiliser relays. This is a crucial aspect because if there were any immobiliser relays in place, the device could be altered with and overridden.

Once the ghost immobiliser is installed, it will block your car from being copied. It will not only stop the vehicle from being started, but it will also assist you in locating it. This is done without altering the wiring in your vehicle. Ghost works by using the buttons in your vehicle to generate an unique, reversible PIN code sequence. The PIN code is entered into a mobile application that you can download to your phone. It takes 20 presses on the buttons on your car to figure out the PIN.

This technology is so advanced that it can't be defeated by a modern-day car burglar. It is a simple to use system that safeguards your vehicle from cloning or hacking. It's simple to install in modern vehicles, and is an excellent choice for those who own expensive or rare cars.

The Autowatch Ghost anti key immobiliser hacking device is a small, weatherproof device that can be concealed inside your vehicle without the need for wiring. It uses the buttons on your car to send information and is programmed to restrict you to access the immobiliser of the ghost. This includes a valet-mode which allows you to maintain your vehicle and then hand it over to valet parking, without disclosing the PIN code.

Easy Installation

With vehicles being stolen all over the country and people being forced to wait for replacements or to purchase a new car, it is important to ensure that your pride and joy remains with you. Most often, thieves target vehicles that are in demand or that could be smashed to make parts. Ghost immobilisers are not visible to thieves, however they can be evaded or removed.

These devices are able to communicate with the engine control unit in your vehicle via the CAN data loop, therefore they aren't detected by thieves who use the traditional OBD port or diagnostics. These devices also stop key cloning, hacking, and other forms of theft. This makes them ideal to protect your precious or expensive vehicles.

It's simple to install the ghost immobiliser since it is a small weatherproof device that can be tucked away inside your vehicle. It is difficult to identify since it does not have any LED indicators or key-fobs. You can be sure that a potential thief isn't able to spot it. You can disarm the system by using your mobile phone. This means that only you will be able start your vehicle.

You can select up to 20 separate button presses, giving you the option of creating an individual sequence that is only known by you. This is similar to the PIN number that you use for your bank or credit card account, and will ensure that only you are able to drive your vehicle away. It is easy to lock your car if you need to leave it using the same buttons.

Another thing that distinguishes the Autowatch ghost apart is the fact that it is an TASSA certified product that was tested by 3rd experts to be as reliable as it can be. It also comes with a vehicle identification system that links to the International Security Register, which will alert authorities if your car is being stolen. This extra layer is one of the reasons why many people choose the ghost immobiliser.cropped-KeyLab-1.png

댓글목록

등록된 댓글이 없습니다.


주소 : 부산광역시 동래구 복천로51번길 18(복천동) | 상호 : 대동방수 |
사업자번호 : 618-17-89968 | 대표 : 노학열 | TEL : 010-9320-0043
COPYRIGHT (C) ALL RIGHT ESERVED
010-9320-0043 시공문의 :  
대동방수개발공사