Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However when windows with double glazing Stoke Newington panes are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap between the door and the window is significant, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close your window and do an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, window repairs Guildford not the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze It could be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is essentially a very simple process, but it's simpler when you have a person to help you hold the frame up.

Verify that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. If they're beyond repair, it might be required to realign them. Secondly the interlock, this is located on the hinge of the Window Repairs Guildford and can be misaligned. Again, it is possible to give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.