Double Glazing Seal Repairs

When double glazing window seals are broken they can cause damp and mould. This can damage the frame and wall surrounding it and can impact your health.

Fortunately, resealing is a more cost-effective way to fix most uPVC window frames rather than replacing them. A glazier will clean the frame and glass of the window, apply a new bead, and smooth it.

Water Leaks

Window seals are made to keep water from your home. However, when they start to wear down, it can result in water leaks around your windows. Not only is a leaky window annoying however, it could also cause costly damage to your home's structure. It is crucial to spot a problem early and have it repaired by an expert before it gets worse.

The source of leaking windows can be found in the glass itself but on the frame or Repairmywindowsanddoors.Co.Uk sill. A leak in this region is the most frequent indication of a damaged window seal. It may be caused by damage to the window seal due to weather or aging, worn-out caulking or even a blocked drainage section resulting in the accumulation of ice or water.

Water appearing between the double-glazed panes is another common indication that your window seal has failed. While this isn't quite as hazardous as a leak since the water doesn't travel far enough to enter your home. However, it could mean that the inert gas that is sandwiched between the panes of glass has lost its lubrication, which will lower the insulating value of your windows.

Condensation between the panes of glass is another common indication of a damaged seal. This may be caused by a failed window seal, or it could be the result of an unforgiving climate in your home or an issue with the glass. It's not just a nuisance however, the condensation could result in mildew and mould growth in your home. This can be a challenge and expensive.

If you're seeing these indications, it's time to conduct an inspection of your double glazed windows. Repairs or replacements can aid in preventing your home from water leaks, double glazing repair lower the cost of energy, and also prevent draughts. It's a small price to pay for the comfort and safety of your family. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our professionals are always happy to assist! We provide assistance to homeowners throughout the Mid-Atlantic.

Condensation

A broken double-glazing seal can allow water to enter the space that is insulating. This water can cause fogging or misting to the window panes.

If you see condensation forming inside your home it's time to contact a professional double glazing repair service. Condensation could indicate that the vacuum seal made by the factory failed and moisture has seeped into the enclosed space.

Condensation can be caused by a number of reasons, but it is usually the result of faulty gaskets and sealants, as well as insulation within the uPVC frame of the windows. Therefore there are different double glazing seal repair options, however it is vital that the seal you choose to replace is properly designed to ensure a perfect fit and a water-tight seal.

Typically gaskets used to fill in the gaps between double-glazed units are made of a material such as polyurethane foam. These are designed to last for a long time but they are susceptible to deterioration as time passes because of wear and tear and exposure to different temperatures and weather conditions throughout the year.

Over time the foam will shrink or crack over time. This can cause cracks in the seal, allowing moisture to get into the double-glazed window. This not only creates condensation, but can also result in an increase in energy efficiency, which means that you're losing heat from your home to the outside air.

One solution to the issue is to have the windows sealed. This is not a sure solution since it will only eliminate the condensation that is already present and not address the issues that are causing the double-glazed windows to leak or create condensate.

Another solution is to have your windows replaced completely and this should be done by a professional who offers an insurance-backed guarantee. This means that in the event that the company fails or is shut down, you will still be protected by the insurance. It's important to know that your replacement windows should be warranted for at minimum 10 years.

Misting

As autumn draws nearer it's a good idea to check that your double glazing seals are in good working order. Worn-out window seals don't just affect the insulation properties of your windows, but can also cause damp, mold and condensation. It's important to fix any issues with your double-glazed windows as soon as you can to prevent further damage and save money on energy bills.

A standard double glazed window is made up of two glass panes that are held together by an internal space filled with gas. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is crucial to ensure the airtight seal that keeps cool and warm air from your home, saving money on your heating costs. These seals are susceptible to damage in time due to the weather, aging, or improper installation. The secret ingredient that makes double-glazed windows so efficient can start to degrade when this occurs.

If the seals are damaged or double Glazing Repair defective and are not repaired they can cause dampness and condensation, which could affect your health as well as the appearance of your window. Mold and damp not only cause damage to your walls, floors and ceilings, but also cause irritants and allergens within your home, which can be harmful to you and your family's health.

One of the most frequent problems that can happen to your double glazing is misting in between the panes. This occurs when moisture gets into the insulated area of your windows. It can be difficult to fix without professional double-glazing repair.

DIY solutions to this problem are available, however, we do not recommend them as they can be messy and can damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to eliminate fog and condensation. This could lead to a variety of problems, such as the possibility of exposing your windows and units to water damage.

Professional glaziers possess the knowledge, tools and experience needed to safely reseal your uPVC frames and give you long-lasting results. They can also give you suggestions on how to properly maintain your uPVC window to avoid future problems.

Draughts

A draught from your window is an indication that the sealant has failed and must be repaired or replaced. This will prevent cold air from getting into your home. It will also improve the efficiency of your energy, reduce heating costs, and improve the comfort of your home.

It is important to note that some draughts aren't caused by the window seals but rather the gap between the frame of the bricks. In certain cases, it could be possible to repair this by simply caulking the gap. If this does not work, you will require having the seal professionally resealed.

If the sealant around a double-glazed window starts to degrade and allow water ingress and can cause damp or even mold in some instances. This could cause harm to health, and cause damage to the property. It is crucial to take care of any water ingress issues as soon as you spot them. And if your windows are still under guarantee it is worth checking with the company that you purchased windows from, as they might cover the cost of the repairs.

It is a good idea to check whether the windows are covered by a warranty. Certain companies offer lifetime guarantees but others only provide 10 years. If your double glazing falls under warranty, it is recommended to contact the company who sold them as quickly as you can and inform them about any issues you're having. The ideal approach is to do this in person or by letters and emails, to ensure everything is documented and clear.

It is also important to remember that draughts are often caused by faulty hinges, not the absence of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but they can become stiff as time passes if they're not regularly oiled. This could cause a gap develop between the frame of the sash and the sash, allowing cold air to enter the home. Replacing these hinges will solve this issue, without affecting window seals.