Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you are going attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. You'll first need to open the windows so you can access the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're happy with the fit, tighten the screws until they remain in place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to shut the window replacement and then perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazing repair glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It is essentially a very simple process, Upvc repair but it's easier if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give advice.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges, also because of wear and tear, could become misaligned. This causes gaps to develop where the sash joins the frame. If they're beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it is feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it may be cheaper to replace them than to repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance immediately.